Body Work 3 |
Outline of the headlamp opening |
Very cool tool.....the RotoZip. It makes fast work of cutting fiberglass |
Headlamp holes cut....Just need to do the vents and turn signals |
Next step...wire the front end lighting |
The completed harness before installing into the front clip |
Rear lights installed, battery in... |
Just how do you get the wiring from the trunk to the frame? By adding a metal plate with house conduit pass thrus. I filled them in with silicone after running the wires |
Rear lighting harness and ground. There is a bit wiring that needs to be done. Do it right and use weatherpack connectors to keep the connections dry |
Here she is, close to drivable. The fun was close to beginning. All I needed to do was a few more body things, like add the front 1/4 panes and some paint. |
Here are the 1/4's installed |
A little white paint on the doors and finish the lights and grille. Who wants to go for a ride? |
